Mini Retro Steam Engine Model with Vertical Heating Boiler

Miniature steam engine model with boiler. Made of brass and aluminum alloy, equipped with an aluminum alloy boiler with safety valves and brass cylinder and piston. The steam engine uses an external copper tube to transfer the steam to the cylinder. After adding water to the boiler. The steam is introduced into the system rotating the crankshaft, which drives the piston and the cylinder assembly to swing left and right. The cylinder swings to the position of the intake hole, and the steam in the boiler enters the cylinder and pushes the piston forward, commonly known as work.

The crankshaft connected to the top of the piston is pushed and rotated synchronously by the piston. The inertia of the flywheel brings the air hole of the cylinder away from the inlet hole of the main bracket, so that the pressure in the cylinder is lost, the piston stops moving forward and continues to rotate, and the air hole of the cylinder is brought into the main bracket. At the position of the exhaust hole, the piston rotates with the crankshaft, the piston retreats, and at the same time discharges the steam in the cylinder, and then continues to rotate, the cylinder will enter the next cycle to do work again and again.

Steam engine parameters;

Piston Material: Brass

Size: L X W X H (MM) | 182X100X185

Cylinder Material: Brass

Net weight: 1.0kg

Exhaust pipe material: brass

Total weight (with packaging): 1.2kg

Chimney Material: 6061

Aluminum alloy boiler outer diameter: 68mm

Base material: bamboo

Boiler capacity: 210ml

Main bracket material: 6061 aluminum alloy

Piston diameter: 8mm

Boiler bracket material: 6061 aluminum alloy

Piston stroke: 12mm

Boiler battery life: 40 min

Flywheel Diameter: 64mm

Boiler material: 6061 aluminum alloy